Specifications

The table below gives you a clearer idea of the impressive performance of Celsius, Celsius Clear and Celsius Plus when compared to standard glass or polycarbonate.

Technical Specification	Celsius (Blue)	Celsius Clear	Celsius Plus	Standard Glass	Poly- carbonate
Heat Reflection	72%	58%	74%	25%	45%
Solar Factor	28%	42%	26%	75%	55%
U-Value	1.4	1.0	1.2	2.8	1.75
Visible Light Transmission	45%	61%	40%	80%	68%
UV Protection	85%	73%	88%	25%	-
Toughened to BS EN 12150-1
Manufactured to BS EN 1279-2
10 year warranty against seal failure
Easy Clean coating
Cavity Fill	Argon	Argon	Argon	Air
Blue Tint

The figures shown above are for guide purposes only. Slight variations may occur due to glass specification, time of year, manufacturing tolerance, point of manufacture and type of instrumentation used.

Visible Light Transmittance This is the percentage of visible light directly transmitted through the glass.

Solar Factor This is the percentage of total solar energy (or heat from the sun) able to pass through the glass.

U-Value This is used to measure internal heat loss during cooler periods. The lower the number, the greater the insulation.

UV Transmission Sun damaging UV rays are dramatically reduced, allowing greater protection of your furniture and fabrics.